It is currently Mon Sep 23, 2019 3:50 am


Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sun Apr 17, 2016 9:20 am 
Offline

Joined: Sun Dec 02, 2007 10:31 am
Posts: 837
Location: Telford
Hi Guys
I attempted imaging through my 1000D fitted with CLS Clip I Filter and Canon EF 28-135mm lens last night.
I was using 28mm focal length at f4 and at ISO 800 in Manual Mode and was shooting in RAW.
I took:
10 Lights each 120secs
5 Darks each 120 secs
10 Flats (In AV mode)
Looking at the Lights in DDP they all had a blueish tinge (as to be expected due to he CLS filter), they looked pretty good to me. Stars seemed quite tight.
I put it all through DSS and arrived at the resultant TIFF image.
When I post processed in Photoshop CS6 the right hand 1/3 of the image developed a colour cast which was obviously different to the rest of the image. I could not find any way of getting rid of this .
Any of you guys got any ideas as to the cause of this and a way of getting rid of it to produce an even image?
Attached are sample of one of the lights (prior to putting through DSS), the resultant flat and dark (after processing in DSS).
I have also attached Autosave 01 (after DSS processing)
Graham


Attachments:
_MG_5425a.jpg
_MG_5425a.jpg [ 187.58 KiB | Viewed 2344 times ]
_MG_5414a.jpg
_MG_5414a.jpg [ 209.97 KiB | Viewed 2344 times ]
_MG_5404_2a.jpg
_MG_5404_2a.jpg [ 243.35 KiB | Viewed 2344 times ]

_________________
Meade LX 10 8" SCT OTA, HEQ5,
Celestron X-cel LX 7mm,9mm,12mm,18mm,25mm
Skywatcher Panaview 32mm
Revelation 2" 42mm
William Optics Binoviewer
William Optics SCT Crayford Focuser
Olympus 8X40 DPS I binoculars
Top
 Profile Send private message  
 
PostPosted: Sun Apr 17, 2016 9:23 am 
Offline

Joined: Sun Dec 02, 2007 10:31 am
Posts: 837
Location: Telford
Dss resultant TIFF and post processed in CS6


Attachments:
After CS6a.jpg
After CS6a.jpg [ 224.8 KiB | Viewed 2343 times ]
Autosave_1.jpg
Autosave_1.jpg [ 213.64 KiB | Viewed 2343 times ]

_________________
Meade LX 10 8" SCT OTA, HEQ5,
Celestron X-cel LX 7mm,9mm,12mm,18mm,25mm
Skywatcher Panaview 32mm
Revelation 2" 42mm
William Optics Binoviewer
William Optics SCT Crayford Focuser
Olympus 8X40 DPS I binoculars
Top
 Profile Send private message  
 
PostPosted: Sun Apr 17, 2016 2:59 pm 
Offline

Joined: Mon Jan 18, 2010 9:25 am
Posts: 5296
Hi Graham,
The star images are not really symmetrical on the left and right side.
Left a bit of coma, right something else.
I suspect that the lens is not quite centred.

However, this should not result in uneven brightness.

If it was a film camera I would suspect light leakage from a not tight door.
But with a DSLR, I don't know.
Can the sensor have some light leakage?

Do you have a wide angle prime lens to see if you get the same result?

It could be that there is a slight tilt of the sensor to the lens axis.
Do you have another DSLR body to try with the same lens?

Regards,
David


Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group